Re: SN95 99/04 full cage / interior fabrication fabrication

thanks
it is time consuming for sure.
lots of cut ,grind, fit , again & again.....

 

Re: SN95 99/04 full cage / interior fabrication fabrication

driver side engine bay back...

#ad


#ad


#ad


#ad


#ad


#ad

 

Re: SN95 99/04 full cage / interior fabrication fabrication



#ad


#ad


#ad


#ad


#ad


#ad

 

Re: SN95 99/04 full cage / interior fabrication fabrication

Randy you do know thats not the right way to sharpen your tungsten , doing it like that will give you an unstable arc . Im not saying you need a tungsten grinder i have a small 5" bench grinder i use and only use it for that and grind towards the point and i even run mine on a scotch brite disk to polish it some and can get an arc the size of a pin head , if needed but it just welds better all around.


&feature=player_embedded#!

 

Re: SN95 99/04 full cage / interior fabrication fabrication

:agree: And you are right ,I am not proud of it but i had to work with what i got at that time.
I was wondering who was going to get it,you always can tell who really welds with the little stuff like that.
thanks for the reminder that will keep me on my toes...

 

Re: SN95 99/04 full cage / interior fabrication fabrication

Ahhh .............. Charles is just loving on you ...

 

Re: SN95 99/04 full cage / interior fabrication fabrication

now if he will come by to visit his dauther & stop by to paint my car ,THAT WILL BE LOVE..... :lh:

 

Re: SN95 99/04 full cage / interior fabrication fabrication

Thats going to be a tough one Randy, per Dr's orders no spraying paint. Since my surgery i can't wear a resperratior , well i can wear it but it wouldn't do anything seeing how i now breathe through a hole in my neck. Im looking at the whole fresh air supplyed suits but have not made up my mind if i want to lay out 2K for something i would rarely use.

 

Re: SN95 99/04 full cage / interior fabrication fabrication

Just run a tube from your neck to the mask and epoxy it in

 

Re: SN95 99/04 full cage / interior fabrication fabrication

Funny Dustin , im working on something that might work , just haven't finish it or tried it yet but trust me i will figure something out and then market it for others like this. Have you seen the anti smoking comericals on TV with the neck deals .

 

Re: SN95 99/04 full cage / interior fabrication fabrication

Yeah, I remember those commercials as far back as when I was a kid.

 

Re: SN95 99/04 full cage / interior fabrication fabrication

pass.side back

#ad


#ad


#ad


#ad

 

Re: SN95 99/04 full cage / interior fabrication fabrication

updated.!
ordered a Strange Engineering Complete Coilover Package from Dave today:
http://www.teamzmotorsports.net/product_p/str-coilover_kit.htm



that way will match the rear:
https://www.theturboforums.com/smf/suspension-and-chassis-tech/sn95-9904-mini-tub-trunk-fabrication/

 

Re: SN95 99/04 full cage / interior fabrication fabrication

Those say they are for 78-93 & 94-95 ?

That's like the line locks , i have yet to see one that says it's for 1998.

 

Re: SN95 99/04 full cage / interior fabrication fabrication

Excelent work! If you don't mind me asking how many hours do you have into the cage/underhood?

 

Re: SN95 99/04 full cage / interior fabrication fabrication

Same struts and shocks i have going on my 97. Nice work in the engine bay!!

 

Re: SN95 99/04 full cage / interior fabrication fabrication

Thanks for the kind words.!

1- yes,I also notice that .But dave will take care of that for us.

2- I will says around a solid 60hrs give or take. It takes twice as long when IT gets done they way YOU want it.

I am not done with the engine bay yet ,but it is a time consuming project....
I still have to weld a hole bunch of holes & I am winging it all the way.....

 

Re: SN95 99/04 full cage / interior fabrication fabrication

Randy one thing that will save you a lot of time on those small holes is to put that nice tig up and mig them, its a whole lot faster and your going to grind them flush anywhy. oke:

 

Re: SN95 99/04 full cage / interior fabrication fabrication

some one else is using it.
I am just gonna have to suck it up and keep tig....

 

Re: SN95 99/04 full cage / interior fabrication fabrication

ups stop by today

#ad


#ad


#ad


#ad