I wasn't leaving hard enough at the line because I did not trust the 17'' MT drag radials.
so I decided to give it a try and floored it at 3k on the two step and went 1.61 on the 60ft.
Went 11.95 at only 115 because I've pulled out too much timing, was running around 20 deg....
so I came back at the line with 22 degrees of timing, at that point I was pretty sure to make my best run ever...
Floored it , then crack.... Broke a stock 28 splines axle .
I've fixed it with stock parts but I am going to upgrade to 31 splines this winter, hope to make a better run before the t5 dies then I will put a C4 on it.