Re: look what is getting a turbo "WITH SMALL VID"

What does your fuel system consist of? Awesome build by the way.

 

Re: look what is getting a turbo "WITH SMALL VID"

Thanks its pretty simple. its an aeromotive a2000 pump with the return plugged up and a -10an hose to the filter and from the filter to the aeromotive 13202 reg 2 -8 lines to the carb and -10an out the reg back to the tank.Thats it the reg goes up 1:1 on boost. this system is good for 1000rwhp. It works flawless

 

Re: look what is getting a turbo "WITH SMALL VID"

How fast did you go in the 1/4- or 1/8-mile naturally aspirated?

 

Re: look what is getting a turbo "WITH SMALL VID"

the best we got out of in n/a was a 11.22 @118 mph

 

Re: look what is getting a turbo "WITH SMALL VID"

Damn, wonder what it's gonna do with the turbo...

 

Re: look what is getting a turbo "WITH SMALL VID"

I say split the block but it looks like it'll be fun till it does. Good luck with it. My number 3 main cap split at 550rwhp, I got lucky I caught before anything else happened.

 

Re: look what is getting a turbo "WITH SMALL VID"

What track was that at?

 

Re: look what is getting a turbo "WITH SMALL VID"

Nice set up aney video of car on strip

 

Re: look what is getting a turbo "WITH SMALL VID"

ok i got it dynoed it made 551rwhp @ 9lbs on pump 93 octane but only 521 ftlbs what gives with the torque ill get the video on tonight

 

Re: BG CUSTOM TURBO blowthru 347 done

Looks great! Not tryin to crack on you, only thing I see is that when ya go blow thru carb its best to clock the carb bonnet at either 12 o'clock, 6 o'clock, 9 o'clock, or 3 o'clock. Just what I have read in the blow thru section a few times. For some reason the bonnet and the carb likes the intake flow better that way.

Hpbob

 

Re: BG CUSTOM TURBO blowthru 347 done

I am thinking that will be true with the EV hat because of the divider, but would it really matter with a CSU hat? (no divider)

 

Re: BG CUSTOM TURBO blowthru 347 done

yeah i was told to grind the divider out looks like ill be grinding this weekend

 

Re: BG CUSTOM TURBO blowthru 347 done

By who?

 

Re: BG CUSTOM TURBO blowthru 347 done

I dont remember but he told me cut it out... what happens if the divider ends up right on top of the vent tubes i put the elbow @ the 3 o clock position and it sits on top of the vent tubes

:here is the dyno vid:
http://videos.streetfire.net/video/7f456e0c-808d-42fe-87b3-98f80153e42c.htm

 

Re: BG CUSTOM TURBO blowthru 347 done

551 rwhp with only 9 pounds is pretty impressive.

David

 

Re: BG CUSTOM TURBO blowthru 347 done

Good looking car. What kind of exhaust are you running? That thing sounds good Keep us posted on some times and some more video.

 

Re: BG CUSTOM TURBO blowthru 347 done

flowmaster y-pipe to 2 2 chamber flowmasters why do you guys think on the third run with an open down pipe it lost alot of power and ran like shit

 

Re: BG CUSTOM TURBO blowthru 347 done

wasnt tuned for it>?

 

Re: BG CUSTOM TURBO blowthru 347 done

im still tryin to figure out how you got 430 wheel horsepower with an 8.8-1 347???? assuming a 15% loss for a stick and 20-25% for an auto that would put you at495 hp for the stick and 537(all on an 8.8 to 1 347) for the auto, i have a 347 with a comp cam xe274hr cam, j302 heads,10-1 and i made 330 wheel hp thru an AOD. if you run 7 lbs of boost this should put your theoretical crank hp between 742 and 805, which is amazing, please give me every detail of your engine build up!!!

 

Re: BG CUSTOM TURBO blowthru 347 done

Well the engine is a very simple setup its a 347 with 8.8-1 compression .40 thick cometics fully ported and polished trick flow track heat heads victor jr intake all hogged out the cam is a custom grind from bennet racing i need to look for the specs...1.6 roller rockers nothing really out of the ordinary the exact same setup in 331 i built made 420 rwhp.The 347 made 430 spinning the engine to 7000 rpm with the turbo it barely hit 5500 rpm and made 551 it just wont rev past 5500 who knows how much power itll make spinning to 7000...any other? let me know