#ad

 

Cut some more off the front end...
#ad

 

Front end all done...
#ad

#ad


This is how the back of the fender is being mounted onto the car...
#ad


Hood being worked on...
#ad

 

Hood all done...
#ad

 

looking sick man gonna be a serious ride

 

Thanks... Hopefully it does decent...

 

The front is all done now basically... Just needs a few more things and it's done...

Cut some of the upper sheet metal and boxed it in...
#ad


Here's some better shots on how the factory trunk was cut up and welded into place...
#ad


Then there was a plate that was welded to the underside of the trunk to fill the gap...
#ad


Then took the fiberglass deck lid and cut it up to fit it for the trunk...
#ad


Front of the car fully done...
#ad


Inside of the area where the core support and front bumper supports would be...
#ad


Front bumper removed...
#ad


Fender support brackets and bumper support brackets...
#ad


Whole front clip removed...
#ad


Cut the factory fender on the back side so it's easier to put the front clip on...
#ad


More updates coming soon...

 

Trunk all done...
#ad


Wing being built and mocked up...
#ad

 

The wing is getting scrapped and redone... I don't like it at all...

Front bumper bracing done...
#ad

 

Very impresive....Looks great!

 

Thankls

 

On the front side bumper was added a peice of alum so when jacking up the car or pulling the car into the trailer the front bumper won't chip or get banged up...
#ad


Steering column finished and redone for better fitment... Also sealed the shaft off and removed the rubber peice...
#ad

#ad

 

Removeable trans tunnel being worked on...
#ad

#ad

 

Removeable Trans Tunnel done...
#ad

 

Now onto the dash... Taking the dash and cutting it apart to make it a two peice dash...
#ad

 

Progess on the dash...
#ad

#ad

 

Carbon Fiber front seat bracing being worked on...
#ad


Carbon Fiber Seat...
#ad


Fitment of the seat...
#ad



More to come...

 

Dry sump tank mount is all done...
#ad

#ad

#ad

 

Lower dry sump mount done...
#ad


Seat structure all done...
#ad


Removable Carbon fiber Seat installed and finished...
#ad


Then there was a lip welded to the car for the wing to attach too...
#ad


Wing under construction...
#ad

 

I am not sure, but I think you might be in the detroit area right? Which chassis shop did you use? Thanks, Steve.