compression ratio 8.63-1 iron eagle dart heads running a carb shop 750 and procharger 1050hp-intercooler. boost should be 14-ish [ATTACH] i have...
i'm not pulling anything yet. but it was indicated by several members that i should be. my combo rev's quickly to about 5800rpm then not much more...
i've just purchased a msd boost timing master i would like to see some suggested settings for this unit. timing reduction start point is...
is that the same as the s10 style or different model?
what model of truck, seems pretty light for a truck looks like a nice starting point :)
a leaking needle and seat on the carb bowls will cause similar issues i chased the issue for a period of time, my plugs would turn black and foul...
overall i agree with your assessment of the combo, thanks for the reply i have had this combo running for like 14years now. i followed the...
my timing curve is 22*initial - 34*total , not pulling timing for boost using premium pump gas - around here the octane is 91. using a Dart...
i do have adjustable upper and lower control arms also running an anti-roll bar on rear axle i have morso trick drag springs in the front i have...
i wanted to get some critiques on my street car performance i got 3-runs in finally at the drags in 1-hour temp was 72-75* and the DA @ the Track...
i need updated software for this tuner:bronzecup: [IMG]
aluminum heads will depend on the rpm range and springs used for your SR-cam. lower lift and lighter than 200#seat pressure would have me on the...