Luniti Solid roller cam 587in lift 609ex lift, 238in dur 248 exdur, 109 lsa for 250shot of nitrous. I am working on a deal for a motor that it...
For that price you could have built a turbo setup that would smoke the ys, ysi, and the f1r! And it would have been more streetable.
If you like low end power you need to look into a roots or screw type charger or maybe a turbo with a smallish exaust housing.
Head gasket question on 713rwhp. I am pretty sure you gotta replace those copper orings everytime you do a head gasket cause they crush. Throw...
What about the stage 3 trick flow cam? If I notch the pistons in the stock bottem end with the Isky tool would it clear 2.02's and a stage 3 cam?
What is the max rpm with stock roller lifters? I am looking at throwing a trickflow stage 2 cam and heads with shaft rockers on my stock...
Do you think these heads will fit on a stock 5.0 bottom end with alittle pistons grinding and a stock cam? They are so cheap and I would be...
Being able to put gas in my car through the fuel door would be great. Taking the trunk lid off sucks balls and New Mexico is so windy its dangerous!
The harley is going to be the pussy machine cause I dont think chicks will like my stang with the 12 point cage and no interior!!! That and the...
My wideband was reading around 10-1 afr so I dont think it was bad tune. Could be a problem with flatness, the heads are pretty fresh so I dont...
Dont you have to use the grooved cobra pulley with a standard rotation? I have heard the grooved side of the belt doesnt like the smooth pulley...
i am carbed so its not injectors, but it is weird that it keeps blowing the same cylinder.
I have heard of people having problems with the belt not contacting the waterpump enough when you run it over the tensioner like in the pics? And...
