Well The main part of the roll cage is finished and in so now it is on to plumbing the truck. First pic shows the installed fuel cell along with...
Thanks !!!
I cut out the rusted metal back to clean steel and had ground it all down to clean metal for welding. It's my picture taking that stinks !
Spent about 20 hours or more bending and fitting the cage into the cab. Worked very hard to tuck it in tight , rolled the rear hoop and brow bar...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
Well, Its been a long time since I have made any progress on this build. Finally back on it . So here is where we are at today.[ATTACH] Fitting up...
Got the rear end finished and sitting on the suspension Stance is about right. I ended up having to get 250# springs for the coil overs to get the...
Once I finished with the cutting it was out with the old back half of the frame and in with the new 4 link setup . The last pics are a couple of...
Thanks !!
Been quite a while since I have posted/ updated this thread. Project was on hold do to other life priorities. So here we go with the current...
Still hacking away on the truck. Not to much to show in pictures, been just doing a lot of work on figuring out where I am going to be running all...
Got the wastegates done and welded in. Now onto the real work. Having to run all the pressure and return lines . Then I get to tear it all down to...
Hi , thanks for watching the thread. Its been a fun build so far. Steep ass learning curve on building a boosted powerplant. This forum is loaded...
Got the exhaust done and run out through the fender wells . Have the intake side done and installed the blowoff valve just before the carb hat....
Here we have the hood temporarily in place an and am waiting for the flatbed to run it up to my exhaust guy . Going to have the dump pipes bent up...
