It’s still running, drove it home without issue from the dyno, I had a loose header bolt so since down pipes were pulled I decided to check my...
Went to dyno car today to get a baseline at 5psi, car made 600/600 at that boost level, was going to change oil and check plugs since car is on...
Used 10w30 Royal Purple Break-In Oil, ready to switch to a synthetic and ran 15w40 Royal Purple on my last motor for a little while. Engine is a...
I have a bung I could use and source to hook up to see pre intercooler, I might test it out one day
I put in the 7.25 spring and went and did a test hit and saw 4.6, guess there is a lot of loss threw the IC, I’m going to see if the ECU can get...
Pulled one wastegate, had a green spring in, mixed up the MV-S chart with the MV-R from a google search, no green spring listed alone on the MV-R...
I have an old boost controller that I’m not using anymore (eboost2) and a electronic gauge from speedhut reading boost from the upper intake...
So went out to log with the solenoids out of the equation, same thing only seeing around 1.5lbs of boost. First gear WOT boost comes on at 5100...
[ATTACH] [ATTACH] Car is a 427w, trick flow 205 11rs, twin S366 turbos, 3” downpipes to 2.5” dynomax ultra flows, have cutouts past the...
So I have wrapped up my twin turbo foxbody build, I’ve put around 15 miles on it and have major issues with heat under the hood. I’ve got a 393w...
Still available...