You are going to have to decide if you want to go the mig or tig route. If you decide to go mig the best bang for the buck right seems to be...
A quote from one of the articles on bobistheoilguy.com: "It is time to introduce the concept of lubrication. Most believe that pressure =...
Thats pretty neat. I take it it is just the angle with the pic that makes it look like the spring is hitting on the coil-over bracket? Troy
Figure $500-600 to do the meth injection right. E85 wouldn't cost to much if you mod the carb yourself-probably buy the Quickfuel e85 metering...
Things could have changed but I recall talking with PA a couple years back when I destroyed my fwd drum (above) and they told me they use stock...
impressive carnage indeed! :cheers: Troy
If you look at real unbiased test like this one: http://www.guysoflidar.com/august-2007/radar-detector-test.html The rx65 is about the same as...
Ya, thats the most inexpensive fix. Probably works great too. I just couldn't trust it with the oil soaked metal and possible heat treat issues....
If you have lost all gears both forward and reverse and your input shaft is still in one piece, most likely this is your problem: [img] This is...
Re: C-4 help needed! It's that shitty stamped steel pan, it isn't flat/rigid enough to work well with the rubber gaskets, and the cork ones...
bell v940 costs less than half and works just as well. www.guysoflidar.com Those that are saying that ~$130 on a radar detector is a scam are...
You can but I wouldn't advise it. Imo, you want it as far away from the carb as possible, yet after an IC if you have one. This will allow maximum...
Still waiting for that explanation ash... ;) Troy
I agree on all points. There seems to be 3 types of people, the ones that completely don't know what the difference is, the ones that have had the...
Ok, please explain. How is the graph going to cross at 5252 when hp=torque at 5250, and for arguments sake the torque line is being graphed at say...
