Well I wasn't sure if it would work but it hasn't cost me anything to try. I have the 18x10's on there now and have 18x9s for the front. I am gonna slide one of those on the rear to see how they fit as well. I was worried that they would be too filling for the wheel wells but have come to find out I will prob need to drop it some to make it not look like it's 4wd.

What do you guys think? (besides the being white part)

#ad


#ad

 

drop it and roll the fenders it it will look great imo. What size are the rear tires?

 

275/35-18 rear

235/40-18 front

 

Put some 315's on there

 

Which SN95 rear, the 99+s apparently are different than the 94-98. I was looking at a 99 rear and it combined with the 05 GT preimum wheels fit perfectly on a Fox body.

 

It is a 94 GT rear which I found to be 7/8" wider on each side. I know the 99+ is a tad wider than that.

The rear rims on there now are a 6.4" back space. The 10 holes that were on it were a 4" (15x7) and were about 2" inside the wheel wells to the edge of the tires

 

Well here is the whole sn95 conversion done. It looks pretty good now that its on the ground. Still think anthrocite (sp?) will look better than white.

Now we will be doing something about that pesky 4 banger this week. I actually have motivation on a project now

Before and after

#ad


#ad

 

I think the rears stick out too far and you'll have trouble once the car is lowered. I run the same wheels, although hypercoated with a 275/40ZR18 in the back and Fox-width rear.

#ad


#ad

 

After it hit the ground and I looked at it good I will have to agree. I may still try to lower it as I already have the springs and I would be out of nothing but time. I do like it as it is now height wise if it doesnt work out.

 

18x9's

#ad