1. The Turbo Forums - The discussion board for both hard core and beginner turbocharged vehicle enthusiasts. Covering everything from stock turbocharger cars, seriously fast drag racers, boats, motorcycles, and daily driver modified turbo cars and trucks.
    To start posting in our forums, and comment on articles and blogs please

    IF YOU ARE AN EXISTING MEMBER: You can retrieve your a password for your account here: click here.

wastegate control question

Discussion in 'Turbo Tech Questions' started by DIL, Aug 31, 2011.

  1. DIL

    Joined:
    Jan 31, 2003
    Buddy of mine is going over his set up and has a question. The wastegates are controller by CO2. What size line should he have with the MSD 7562 controller and the wastegates? Its quarter in line now from bottle to inner fender then its Y'd to two 1/4 in lines running to the gates?? Big enough??
    Thanks in advance and if you need more info let me know.
     
    DIL, Aug 31, 2011
    #1

  2. Lance

    Joined:
    Feb 14, 2006
    A wastegate control port is a "dead head" device, it doesn't need much flow.
    Basically, your fine. Plenty of line.
     
    Lance, Sep 11, 2011
    #2
Loading...
Similar Topics - wastegate control question Forum Date
Lack of boost control with wastegate welded to housing, looking for advice on revised location. Turbo Tech Questions May 2, 2017
BOV and Wastegate Pressure, Control, and Wiring Turbo Tech Questions Jan 25, 2017
Using a wastegate on the cold side to control boost and spool times Turbo Tech Questions Nov 16, 2010
Loading...