I have a 99 mustang 4.6. Stock motor. I got this turbo from a buddy. It should work for 12 lbs of boost or so right? With all fuel upgrades and a tune of course.
T70. T3
Compressor iinducer. 56.6mm exducer 75mm ar 0.82 trim 57
Turbine trim 62 inducer 74.4 exducer 58.4 ar 0.70

#ad


#ad


#ad

 

It would be good on a 2.3L. Get a second one and you're in business.

 

I agree, its on the small side. I think 2 would be too big. S363-s366 would work well, you could go to one of the inexpensive s472 units with the smaller turbine and do pretty well, although they take up a lot of space. Look for something with 63mm or larger inducer on the compressor side, 76/80mm on the turbine side.

 

Like the others have said, too small to work well. Look for something with a 60-70mm compressor inducer, and a 64- low 70's turbine exducer. The 366 will give you some room to grow. Also T4 is what you want.

 

Either of these would work if you plan to keep the engine stock, and on moderate boost. If you plan to push it a bit more, then the 366. Beware of Ebay descriptions, yours is not a T70, and the one I shared is not a GT45. https://www.ebay.com/itm/154086544708?hash=item23e0461544:g:k9sAAOSwwUlfXsnM https://www.ebay.com/itm/154087981771?hash=item23e05c02cb:g:80AAAOSwM8xfYC4A

 

Thanks for the replies. I only paid 60 bucks for it. So 60 bucks if anybody wants it.