1. The Turbo Forums - The discussion board for both hard core and beginner turbocharged vehicle enthusiasts. Covering everything from stock turbocharger cars, seriously fast drag racers, boats, motorcycles, and daily driver modified turbo cars and trucks.
    To start posting in our forums, and comment on articles and blogs please

    IF YOU ARE AN EXISTING MEMBER: You can retrieve your a password for your account here: click here.

New Cam Motion Solid Roller Specs

Discussion in 'Turbo Tech Questions' started by turbocobra, Mar 3, 2005.

  1. turbocobra

    Joined:
    Feb 5, 2003
    I put a new cam request on the cam motion website and got the following recommendation:

    RECOMMENDATION
    Grind Number R2481-2391-14+4
    Duration (intake/exaust) 249/242
    Lift (intake/exaust) .695/.688
    Lobe Center Separation 114
    Intake Centerline 110
    Comments HOT LASH .025
    Price US$290.00 + SHIPPING

    My current hydro roller cam specs are .574/.564 - 226/221 on a 114 LSA.

    This new solid roller seems very large compared to the hydro. Cam motion is normally very conservative.

    Also, would this be considered to be a "low lash" roller?
     
    turbocobra, Mar 3, 2005
    #1

  2. WaterPog

    Joined:
    Jan 23, 2003
    are those duration numbers at .050?

    If so that's a lot bigger than mine in both lift and duration.
     
    WaterPog, Mar 3, 2005
    #2

  3. turbocobra

    Joined:
    Feb 5, 2003
    Well... I just assummed they were, but it doesn't specify .050. I will email them back and ask.
     
    turbocobra, Mar 3, 2005
    #3

  4. dsman

    Joined:
    Sep 10, 2003
    With over 650 lift that is most definitely 249/242 @ .050. I think low lash would be something like what they speced out for me, it was (IIRC) 242/239 @ .050, .637/.629 114 LSA .016/.018 hot lash. I think your cam would make power to 7500+ RPM's.
     
    dsman, Mar 3, 2005
    #4

  5. WaterPog

    Joined:
    Jan 23, 2003
    That's what I was thinking too, I know mine pulls to 7500 w/o issue and like I said it's even smaller than dsman's.

    Good thing is that I'm irish so i'm used to having a small one. :D
     
    WaterPog, Mar 3, 2005
    #5

  6. Snipe656

    Joined:
    Jan 12, 2003
    Sounds similar to the Isky solid I have in the car I am selling. Though do not have the cam sheet handy to verify.
     
    Snipe656, Mar 3, 2005
    #6

  7. NIL8GM

    Joined:
    Jan 30, 2003
    That is not a low lash cam. Cammotions low lash rollers have a .010 hot lash. Call them up and ask for a street roller grind and you will get a much more conservative cam. It helps alot to talk to someone there.They speced out my 428 street solid at 255/247 608/602 114lc.

    Thanks
    Rick
     
    NIL8GM, Mar 3, 2005
    #7

  8. lteone

    Joined:
    Aug 9, 2004
    edit im dumb
     
    lteone, Mar 3, 2005
    #8

  9. SWT Racing

    Joined:
    Jan 29, 2003
    That's almost identical to my Cam Motion solid roller:
     
    SWT Racing, Mar 3, 2005
    #9
Loading...
Similar Topics - Cam Motion Solid Forum Date
Victor Jr. springs and Cam Motion Solid Roller Turbo Tech Questions Jan 31, 2005
HELP!! Cam #'s from Cam motion Turbo Tech Questions Apr 3, 2007
Cam motion cam Turbo Tech Questions May 4, 2006
Loading...