I want to lose the 4 lug on the rear of my car and go 5 lug, however, I plan to keep the 4 lug up front due to the race brakes I have there. I need a 15x12 for the rear with a 6.5 bs probably, and a 3.5 or so front rim in 4 lug. I looked at race star and they make them but their backspace is all way too deep. The 9 in is just too wide due to the stock suspension setup. Show me some ideas. My fingers are tired of searching.

 

I'm a huge fan of the Weld RTS wheels but man they are pricey in that rear size. Not sure you're going to find anything that has a matching 4 lug front runner though. How much would you have to change to make the fronts 5 lug?

Weld RT S 15x12 with 6.5" backspacing - part number 927-71LB-512A65A
Weld Draglight " " - part number 927-90-512042

 

Thanks,I like them too. The fronts are probably impossible to change out because it was a custom built setup. Years ago, there was a mustang specialty company called ground pounder, it was a sister company to central coast mustangs, now both long gone. The owner put this kit together using parts from wilwood and other manufacturers along with a custom made bracket. I would need a 5 lug hub as well as a 5 lug hat for the rotor in the proper offset. Not sure all that is possible, but I guess it is worth a try.

 

Holeshot has 4 and 5 lug options: https://holeshotwheels.com/

 

Thanks, that is a good option although a bit pricey.

 

You can get these wheels in four lug.
#ad

they only have the matching rears in 15”x10” though.
The fronts runners will work with non matching rears IMO. I posted these wheels a while ago, others did not seem to like them, I do. I have purchased a couple of sets of wheels from lmr with good results.

 

Thank you. I've toyed with just running racestar 4 lug front runners and then getting a higher dollar set of 15 x 12 rears.

 

I have a set of billet specialties 15x12 or 15x13, my rear is narrowed so not sure if they would work? If u want I can verify them tomorrow. I think I have 450$ in them.

 

#ad

 

Let's talk about the stamped stained concrete driveway to look like a hard wood floor. Wow!

 

Thank u!

 

Not sure if you ever found some wheels but these weld rt s71 wheels are nice, they are expensive though.
A guy on YB has a set for sale with rubber and only 500 miles use.
https://www.yellowbullet.com/threads/weld-rt-s71-4-lug-setup-for-foxbody.2668925/

 

Haven't gotten wheels yet. Those are nice but I need 5 lug, that's the reason for switching wheels. Thanks tho

 

I thought you wanted 4 lug because of your front brakes.

 

At first, yeah, just for the fronts. But since I found all the parts on Wilwood's website to switch to 5 lug, I'm just going all 5 lug and selling the Bogarts.