HP Performance Stage I Twin Turbo Kit
#ad

2- 50mm Garrett Turbochargers
2 '“ Tial Watse-Gates
2- Blow-off Valves
Front Mount Intercooler
Turbo Headers
Down Pipes
H- Pipe
Coil-over front suspension
D&D K-Member
Steeda Complete Quadrant Kit
Adjustable Clutch Cable
Double Hook Quadrant
Firewall Adjuster
#ad

#ad

#ad

#ad

#ad

#ad

#ad

#ad

#ad

#ad

#ad

MMR 950 Stroker shortblock
#ad

Trick Flow Heads 44cc
#ad

MMR Stage II Turbo Cams
Comp Springs (Upgrade for the TF heads) #26125-16 Beehive
Victor Jr. Intake
Cometic Head Gaskets
Melling Oil pump (w/teflon coated gears)
Cloyes timing gears
MMR Fuel Rails for Edelbrock Manifold
Accufab Plenum and throttle body
#ad

MMR Street/Strip 9 Qrt. Oil pan (with two bungholes for oil-cooled turbos)
Bosch O2 sensors
Extentions for O2 sensors
Powdercoating of my intake manifold and timing cover were done by Danny (aka dksix)
This guy is RECOMMENDED and does fantastic work!
#ad

#ad

#ad

AEM Peak and Hold Injector Driver (10 channel) # 30-2710 Installed by Rob (AKA) Huafist
#ad

TKO 600 Transmission
Centerforce Clutch
Bell Housing
MMR Street/Strip 900 Fuel System w/sumped fuel tank
#ad

*2 '“ 255lph fuel pumps
*80lb low impedance fuel injectors
* -10 Inlet to pumps, -8 feed line, -6 return
*Fully adjustable fuel pressure
Steeda Bumpsteer Kit
#ad

Full-Length Steeda Sub Frame Connectors
#ad

#ad

#ad

 

This build is nearing the final days of completion. I have to thank Scott Noe of Noe's Performance for a tremendous job (Noes Performance

1510 Liberty Hill Rd
Morristown TN 37814

423-317-7272 ).


The car is being dyno-tuned tuesday at Amazon in Anderson S.C. 8)

 

Gonna be bad ass for sure,congrats on a sweet car.

 

I dont know why im on this forum. everyone I get on here it make me like mustang a little more. but nice build. any power our et goals?

 

Nice build. What does a twin hp turbo kit go for $?

 

I was hoping for 9 second ET's, but I have a long way to go to get the rear suspension right. I will likely have to settle for 10 second timeslips until I "learn" how to drive the beast and iron out some things....

Frank B.

 

You will pay in the neighborhood of $6,500 for the HP Performance Kit if my memory serves me. It seems to be worth the money though.

 

How long did you have to wait for your HP Kit.? I run an HP kit on my 98 Cobra 4V with twin 60s ,i like the kit and it makes awesome power. Some people rag on HP about how long it takes for the kit to ship but i think its a great kit. You should have put some 4V heads on that short block and really make some power. going to be a nice build you have all top of the line parts. Good luck with it.

 

i just did a tfs 2v build also, single 76 on 14.5lbs car made mid 600, urs should move, good luck with the build

 

I have had my kit from HP for a few years now, but it felt like it took months to finally get it back then. But like you said, it is a good product for sure. Thanks man!

 

I am really hoping to get near 700rwhp out of this one. Wish me luck....

 

any updates?