Just got done pulling an injector out of the fitech, going to see if I can get bigger injectors #ad
#ad
#ad


#ad


#ad


#ad

 

It appears by the part number they are made by fast, and are ls3/ls7 style from what I can tell from measurements, aND they measure 12.5 ohms. What would I need to go 1400 hp safely as far as size? http://www.fuelairspark.com/fas/fuel-injectorshtml/

 

Very interesting. Ask Fast and see if they know and recommend something.

 

i emailed them yesterday, going to drop the injector off today at the fuel injector place

 

I asked FITech about it a while back if the injector was upgradeable on the 1200..they said if I found one that would work, then yes. They didnt have any, so I guess what comes with the 1200 is all they have. It would be really interesting if it worked and was user upgradeable.

 

Fast didn't know anything by the part number. Here's the deal, it is an ls3/ls7 shorty injector, but with an ev1 plug (supposedly same as ls1 plug ). My injector shop can get a 105 lb hr injector set for 899$. There has to be a cheaper way.

 

injectors are expensive... I need a set.. almost $900. :-/

 

Found any cheaper injectors?
Have any part numbers to share?

 

Are they capped? Perhaps try decapping them

 

You making 1200 now? If so, what's the duty cycle?
At what base psi?

 

Did you figure out anything on the injectors?

 

I know my 6.0 @22lb is at 56 % injection cycle

 

This guy found something that might work.

https://www.theturboforums.com/thre...dder-kit-yet?p=1992568&viewfull=1#post1992568

 

They said when you order, make sure you specify LS3/7

 

I wonder if you install them if it will work with the FITech unit? Will it need to be recalibrated or ? Its impressive as hell that its already in the 9's.

 

Have you looked at the HI-Z Bosch 210lb short injectors? They are $60 each shipped. Recently tuned a set on an E85 car and they worked great.

Look pretty similar and can't beat the price at $480 a set.

#ad


#ad

 

the plug may be different

 

True, but plugs are cheap. They don't look to take up any extra space anyway.

 

Exactly....We do not use the "adapter jumpers". We cut the old plugs off, crimp new pins/connectors on. No reason not to do this on this harness.

 

Where are you finding them for $60 each? You have a link? I'm finding them for twice that.