saw this stuff on fleabay, really like the way they place the turbos, way tighter than anything else i have seen. CX racing twin turbo manifold, turbo,and downpipe hotside kit. the price is double the other ebay kits, but still seems kinda cheap. anyone used any of this stuff? and are two t76 turbos too big for a 6500 rpm big block?

 

Link?

 

i don"t have a link, but just look up" BBC twin turbo kit" on ebay, it's like the third one in, can"t miss it- it"s the not so cheesy looking one with alot of pics mocked up in a 67 chevelle

 

Here's the link.

http://www.cxracing.com/mm5/merchan...ode=TRB-KIT-BBC-CHEVELLE-NO-IC&Category_Code=

They offer a accompanying intercooler kit, but only for the 64-67 Chevelle platform.

I'm considering the above as the basis for my build because I also like how everything is laid out. My concern is steering shaft interference as my N/A headers are literally a cock hair's clearance in my 71 Monte Carlo big block.

Subscribing to this thread.

 

I figured that in a 70, there would be ample room, because 66-67 are the tightest bays out of all the chevelles, with bbc anyways, bet it would fit in a monte....don't those turbos look huge, or is it just me?

#ad


#ad

 

And I planned on skipping the inter cooler kit, and using an EV hat with spacer, if that is the best one, don't really dig the China hat and the merge pipe they used. Looks kinda ghetto, especially how the cold side pipes hang below the bumper.....

 

Intercooler piping....

#ad

 

used these headers on a 69 c10 and they are pretty close to the valve cover,, might have to take the header off to remove the valve cover,, nice headers though

 

You could always run these v/c's, like I have on my boat motor, designed to clear center rise exhaust !

#ad

 

those are cool valve covers ^^^^^

 

Looks like CXracing is having a 10% labor day sale.

 

maybe you can see how close to the covers they are ,, nice headers though

#ad


#ad


#ad

 

^Those are the CXracing headers from the link mocked up? That's not bad....

 

yes cx bbc chevelle headers

 

Man those turbo's look HUGE! And I was thinking the ones in the CXracing kit were too big! But I really don't know my turbos yet....are t76's
Bigger than Gt45's? What would you suggest for a twin BBC setup with a max 6500 rpm? (With 3.73/ 3500stall)

 

Jesus those are big! Awesome setups!

 

those are the 69mm gt45s turbos last i checked they are now 188.00 ea shipped,, had seen a couple guys running the gt45 on 454's and thought we'd give it a try

 

I'm worried about these headers clearing my steering mount. Take a look at how tight my headers are right now.

#ad
#ad


#ad


#ad

 

if you get some id make sure to test fit them the day they showed, if they didnt work i guess send them back??

 

Whose cast elbows are those? Is that something you sell?