1. The Turbo Forums - The discussion board for both hard core and beginner turbocharged vehicle enthusiasts. Covering everything from stock turbocharger cars, seriously fast drag racers, boats, motorcycles, and daily driver modified turbo cars and trucks.
    To start posting in our forums, and comment on articles and blogs please

    IF YOU ARE AN EXISTING MEMBER: You can retrieve your a password for your account here: click here.

bought a MP 70 have some questions

Discussion in 'Turbo Tech Questions' started by 01snake, Jan 9, 2012.

  1. 01snake

    Joined:
    Oct 30, 2011
    Can you unbolt the cold side housing and rotate it and bolt it back together? The outlet is in the way and if I could spin it. It would work...

    What size oil feed and drain fitting do I need? If it means anything the exhaust housing is a t4 divided 1.00ar

    What size lines should I run for the oil feed and return?
     
    01snake, Jan 9, 2012
    #1

  2. antonmies

    Joined:
    Oct 3, 2006
    loosen the outer bolts just a bit to be able to rotate. Don't oipen it completely, the O-ring between the housing and backplate can be a bitch to install.

    Oil drain 5/8", some people use 1/2". The oil inlet fitting is with M10x1mm thread, you can use 1/8"BSP, but you need some loctite.

    -4AN for oil feed is OK.
     
    antonmies, Jan 9, 2012
    #2
Loading...
Similar Topics - bought questions Forum Date
Bought a Billet wheel HX52...have some wastegate and boost questions...i searched Turbo Tech Questions Mar 29, 2013
Just bought a turbo mustang, got some questions Turbo Tech Questions Aug 22, 2010
just bought a 02 Tacoma..questions Turbo Tech Questions Mar 21, 2008
Loading...