I have a bbc 468
dart 320 heads
forged bottom end
1050 dominator carb
water meth injection
turbo 400 trans

95 Camaro car is about 3500lbs not a all out drag car but she is sporty.
not a daily driver but would like to putput around town from time to time.

when I got to the track it will be 90% 1/8th mile
pump gas and water meth on the street.

110 race gas pluss the water meth at the track
looking at shifting around 65-6800 rpms.

turbo is a single precision 98mm g trim
turbo is said to be good for 1850 fwhp


few questions

what comp should I shoot for as I have to get pistons?

what rear gear should I put in the ford 9 inch?

also any one care to ball park what it will put out hp wise at a max of 25lbs of boost on a race tune?

 

#ad


#ad

 

#ad


#ad

 

this car had a 5.3 in it but I yanked it out and sold it to build a more powerful and durable bbc

 

That is a lot of turbo. Planning aftermarket block?

9:1 you can run more or less. The more compression the closer the tune needs to be

Gear ratio - Depending on tire height, rpm you plan to spin, mph estimate

 

Stock block splayed caps and a lil block filler. I figure keep it around 65-6800!rpm and let the turbo work. I have no desire to max this combo out I think 1200 fwhp should put me around 5.50-5.20 if she hooks .

i think the stock block should handle this vs a stock sbc at that same power level or even 1000 fwhp.

i figure the motor should make 600 N/a