1. The Turbo Forums - The discussion board for both hard core and beginner turbocharged vehicle enthusiasts. Covering everything from stock turbocharger cars, seriously fast drag racers, boats, motorcycles, and daily driver modified turbo cars and trucks.
    To start posting in our forums, and comment on articles and blogs please

    IF YOU ARE AN EXISTING MEMBER: You can retrieve your a password for your account here: click here.

Anderson pms turbo ignition?

Discussion in 'Turbo Tech Questions' started by Kcdmustang89, Dec 3, 2021.

  1. Kcdmustang89

    Joined:
    Feb 10, 2021
    I have a 308 195 cc canfield heads. 70mm turbo 47 lb injectors. Hpx slotted maf .c4 full manual reverse valvebody with trans brake. I have a few questions

    I know I need a map sensor for boost reference. Correct ?

    Do I b
    Need to run an msd box or an msd btm with the pms

    Do I need a boost controller ?

    Sorry if these seem like dumb questions first turbo build
     
    Kcdmustang89, Dec 3, 2021
    #1

  2. Disney Lincoln

    Joined:
    Feb 14, 2003
    Yes, the PMS will need a MAP sensor. IIRC, they came with them in a kit.
    Yes, you'll need an ignition box. The PMS can change fuel and timing, but it can't amplify the ignition which is what you will need with boost.
    You can run it on just wastegate spring pressure if you want. A controller will of course allow you to turn it up past that.
     
    Disney Lincoln, Dec 4, 2021
    #2
    B E N likes this.
Loading...
Similar Topics - Anderson pms turbo Forum Date
Sct chip or Anderson pms? Turbo Tech Questions Jul 29, 2016
what mass air to use w/ my anderson pms series 2??? Turbo Tech Questions Oct 9, 2008
ANDERSON PMS, What ignition box/coil?? Turbo Tech Questions Apr 11, 2007
Loading...