1. The Turbo Forums - The discussion board for both hard core and beginner turbocharged vehicle enthusiasts. Covering everything from stock turbocharger cars, seriously fast drag racers, boats, motorcycles, and daily driver modified turbo cars and trucks.
    To start posting in our forums, and comment on articles and blogs please

    IF YOU ARE AN EXISTING MEMBER: You can retrieve your a password for your account here: click here.

A couple of quick questions.

Discussion in 'Turbo Tech Questions' started by Marbles, Feb 23, 2004.

  1. Marbles

    Joined:
    Feb 19, 2004
    I am building a 408 with AFR 225's and have two T04B 52 mm's to run a twin system. The A/R's are .60 in .90 out, with a p trim. What does the A'R really suggest? Hopw quick of a spool and how much rpm they will take? And secondly, if the point of intersection of the flow and preasuere ratio on compressor maps meets left of the choke line does that meen the turbo's are too small for the application? I did the math and came up with haveing roughly 45 lbs/min per torbo at 10 lbs (1.6 ratio) and they met to the right opf the choke lines for these turbos. Thanks Jonathan.

    Light Em Up!:)
     
    Marbles, Feb 23, 2004
    #1
Loading...
Similar Topics - couple quick questions Forum Date
Couple quick questions on turbo build Turbo Tech Questions Jan 15, 2015
couple questions and help please Turbo Tech Questions May 3, 2014
Couple of questions on my combo Turbo Tech Questions Jun 12, 2012
Loading...