before mustang week this year im going to swap in a 357w. Goal is to run 9's with the 17's and drag radials. currently i have a ponydown 70mm kit that i am going to swap over. Im going to modify the kit to fit the 357w and just upgrade the exhaust to 3.5". going to run my same 70mm turbo till it wont do anymore. also im going to swap over my heads. got a bunch of parts to thorw in this so here are the specs.



1993gt 2997lb weight w/driver



94 351w roller block

probe srs inverted dome pistons

scat H beam rods with ARP 2000 bolts

tool steel wrist pins

file-fit moly rings

ford racing x303 cam

billet distributor

vic. jr. heads

pro products typhoon



pa c4

ucc turbo converter (thanks conbread)

3:27 gear



qa1 K member kit

upr rear upper/lowers

6pt cage



80lb inj

twin walboro gss340 pumps

tuned on Megasquirt 2 PNP



ponydwon hotside modified for the 357

3.5" exhaust

70mm turbo



there is alot im missing but for the most part its there. here are some of the pics. finished the cage about a month ago so here are the pics as of then. just got the rest of the parts today.

this is my old setup on the 302.

#ad


#ad

#ad

#ad

#ad

#ad

#ad

#ad

#ad

#ad

 

#ad

#ad

#ad

#ad

#ad

#ad


the old 302 out

#ad


turbo kit on the 351 before heading to the machine shop.

#ad

 

to get everyone up to date: the first 351w roller block i droped off had a crack in it.

#ad


here is the second 351w roller that I have. dropped it off monday and pray this one is good.

#ad


here is how the engine bay looks. getting ready to paint it the same color as the car. not going to fill all the little holes. ran the harness behind the dash also to clean the bay up.

#ad

 

What kind of power are you shooting for?

 

lookin good keep on buildin looks like ya got a bunch o parts