=MOD MOTOR torque specs=

I feel that there is a need for this topic.
This way we will be able to help our mod motors brothers with their projects...
I will be putting together mod motors using all blocks & heads available.
That way we will have torque spec for every MOD MOTOR application.
The topic is about torque spec so please lets keep it at that.
Thanks

Engine torque specs - Ford Mustang using OEM torque to yield bolts

4.6L V8
Camshaft Sprocket Bolts 85 ft. lbs.
Camshaft Cap Bolts 90 in. lbs.

Cylinder Head Bolts 4.6L with sae30w oil
Step 1 30 ft. lbs.
step 2 add 90*
step 3 loose all bolts - 1 full turn
Step 4 30 ft. lbs.
Step 5 add 90*
Step 6 add 90*

Main Bearing Caps 2 Bolt main
step 1 30 lb-ft
Step 2 add 90*

Main Bearing caps 4 bolt main
step 1 small bolts 90 lb-in
step 2 big bolts 90 lb-in
step 3 small bolts 18 lb-ft
step 4 big bolts 30 lb-ft
step 5 add 90* to all

Jack Screws Aluminun block
Step 1 45 in. lbs.
Step 2 90 in. lbs.

Side Bolts 96/98 Aluminum block
Step 1 90 in. lbs.
Step 2 170 in. lbs.

Side bolts 99 & up Aluminum block 4v/3v
Step 1 30 in lbs
Step 2 90 in lbs

Side bolts cast blocks romeo
Step 1 45 in lbs
Step 2 90 in lbs

Side bolts cast block windsor
Step 1 22lb-ft
step 2 add 90*

Oil Cooler-to-Filter Adapter Insert 1996 59-74 ft. lbs.
1997 and up 41-53 ft. lbs.
Oil Filter Adapter Bolts 15-22 ft. lbs.
Oil Pan-to-Engine Bolts 22 ft. lbs.
Oil Pick-up Tube-to-Main Bearing Cap Nut 20 ft. lbs.
Oil Pick-up Tube-to-Oil Pump Bolts 100 in. lbs.
Oil Pump-to-Engine Block Bolts 100 in. lbs.
Rod Bearing Cap bolts Step 1 18-20 ft. lbs.
Thermostat Housing-to-Engine Bolts 15-22 ft. lbs.
Timing Chain Cover Bolts 15-22 ft. lbs.
Timing Chain Tensioners/Guides 20 ft. lbs.
Crankshaft Bolt 125 ft. lbs.
Water Pump Mounting Bolts 20 ft. lbs.
Water Pump Pulley-to-Water Pump Bolts/Nuts 20 ft. lbs.
Flywheel/Driveplate Bolts 59-64 ft. lbs.
------------------------------------------------------------------------------------
ARP torque specs with sae 30 w oil
ARP rod bolts 55 lb-ft
ARP 2000 rod bolts 60 lb-ft
ARP head studs 90 lb-ft
ARP 2 valve mains 70 lb-ft 30w oil
ARP 2 valve mains 60 lb-ft with ARP moly lube
ARP 4 valve mains

PRELOAD (TORQUE) RECOMMENDATIONS​

.Following the manufacturers recommended torque sequence tighten the nuts in three equal steps ​

with ARP ULTRA-TORQUE FASTENER ASSEMBLY LUBRICANT.

http://arpinstructions.com/instructions/156-4301.pdf

http://arpinstructions.com/instructions/256-4201.pdf

#ad

 

Re: MOD MOTOR torque specs

1st motor
bolck 91/04 FoMoCo cast iron block p#F6AZ-6010-CB<155 lbs>
The cast 2 bolt main studs is #ARP-156-5401<2 valve & 03/04 Cobra>60 lb-ft with ARP moly lube

#ad


#ad

 

Re: MOD MOTOR torque specs

With 30w motor oil

Side Adjusting Jack screws
Step 1 45 in lbs
Step 2 90 in lbs

Side bolts cast blocks romeo
Step 1 90 in lbs
Step 2 16 lb-ft

#ad


#ad

 

Re: MOD MOTOR torque specs

ARP torque specs with sae 30 w oil
ARP rod bolts 55 lb-ft
ARP 2000 rod bolts 60 lb-ft

#ad

 

Re: MOD MOTOR torque specs

ARP Head Stud Hex Kit: ARP-156-4101 '“ Fits all 4.6/5.4/2V/4V complete with nuts/washers
Torqe to 90 lb-ft with ARP moly lube
C heads 99/01
-------------------------------------------------------
On the side note, Also remember

Also the head stud kit will work on any 2 valve , 3 valve or 4 valve...

ARP Head Stud 12 Pt Kit: ARP-156-4301
ARP Head Stud Hex Kit: ARP-156-4101
Torqe to 90 lb-ft with moly lube
-------------------------------------------------
ARP Head stud ARP2000 ARP-256-4201
Torqe to 100 lb-ft with moly lube
ARP Head Stud ARP2000 ARP-256-4001
Torqe to 100 lb-ft with moly lube

#ad

 

Re: MOD MOTOR torque specs

Camshaft Cap Bolts 90 in. lbs.
With 30w motor oil

#ad

 

Re: MOD MOTOR torque specs

Camshaft Sprocket Bolts 85 ft. lbs.
With 30w motor oil

#ad

 

Re: MOD MOTOR torque specs

Nice writeup I will need this in about 6-7 more months when I get back stateside..

 

Re: MOD MOTOR torque specs

Great write up Randy... Hope I won't have to use it anytime soon. LOL

 

Re: MOD MOTOR torque specs

Again, great info! Someone needs to sticky this! 8)

 

Re: MOD MOTOR torque specs

2nd Motor
93/98 Teksid aluminum block p#F6LZ6010-AB<87.15lbs>
The aluminum 4 bolt main is # ARP-156-5208 <4 valve 92/98> no windage
Torque the 10mm studs nuts to 60 lbs-ft with ARP moly or 70 lbs-ft with 30w oil
Torque the 8mm studs nuts to 22 lbs-ft with ARP moly or 28 lbs-ft with 30 w oil

#ad

 

Re: MOD MOTOR torque specs

With 30w motor oil

Jack Screws Aluminun block
Step 1 45 in. lbs.
Step 2 90 in. lbs.

Side Bolts 96/98 Aluminum block
Step 1 90 in. lbs.
Step 2 170 in. lbs.

#ad


#ad

 

Re: MOD MOTOR torque specs

ARP torque specs with sae 30 w oil
ARP rod bolts 55 lb-ft
ARP 2000 rod bolts 60 lb-ft

 

Re: MOD MOTOR torque specs

ARP Head Stud Hex Kit: ARP-156-4101 '“ Fits all 4.6/5.4/2V/4V complete with nuts/washers
Torqe to 90 lb-ft with ARP moly lube
C heads 03/04
-------------------------------------------------------
On the side note, Also remember

Also the head stud kit will work on any 2 valve , 3 valve or 4 valve...

ARP Head Stud 12 Pt Kit: ARP-156-4301
ARP Head Stud Hex Kit: ARP-156-4101
Torqe to 90 lb-ft with moly lube
-------------------------------------------------
ARP Head stud ARP2000 ARP-256-4201
Torqe to 100 lb-ft with moly lube
ARP Head Stud ARP2000 ARP-256-4001
Torqe to 100 lb-ft with moly lube

#ad

 

Re: MOD MOTOR torque specs

Camshaft Cap Bolts 90 in. lbs.
With 30w motor oil

 

Re: MOD MOTOR torque specs

Camshaft Sprocket Bolts 85 ft. lbs.
With 30w motor oil
-----------------------------------------
on the side note
If using aftermarket camshafts you will need ARP sprocket bolts
P# ARP 256-1001
Torque to 95 ft. lbs with ARP Molly lube

#ad

 

Re: MOD MOTOR torque specs

Your right, it's stuck now

 

Re: MOD MOTOR torque specs

3rd Motor
2001/up NVH 5.4 iron block p#2L1Z-6010-AA<185lbs> Good up to 1200rwhp
The cast 2 bolt main studs is #ARP-156-5401<2 valve & 03/04 Cobra>60 lb-ft with ARP moly lube

#ad


#ad

 

Re: MOD MOTOR torque specs

Side bolts cast blocks Windsor with 30w oil
Step 1 22lb/ft
Step 2 add 90 degree

#ad

 

Re: MOD MOTOR torque specs

ARP torque specs with sae 30 w oil
ARP rod bolts 55 lb-ft
ARP 2000 rod bolts 60 lb-ft
-----------------------------------------
on the side note:
If you use Oliver billet rods with ARP 2000 rod bolts
You will have to use the Oliver moly lube
The torque specs from Oliver is :
30 lb-ft <5/15 rod bolt>
40 lb-ft <3/8 rod bolt>
50 lb-ft <7/16 rod bolt>

#ad