hey guys I am new to the turbo world can anyone help me with a safe base tune it is a 1988 mustang 306 42lb injectors ms pnp2 ecu 72mm b&g turbo 10psi of boost just till I can get to a dyno thanks so much for the help

 

Can you post your current tune or project folder so we can look at some things? I can't give you a base for your PNP ECU since I use a different ecu. it'd be easier to open your project and tailor your tune file to your engine.

 

I will have them to day for you

 

#ad
#ad
#ad

this is what it is running now

 

5.0 thunder if you can give me a email I will send the tunestudio file

 

You can send the tunerstudio files to

This content is protected

or upload the project to dropbox or google drive and share them. I prefer the 2nd method most of the time because the project file includes all the firmware data and stuff.

 

From a quick glance though, the AFR Table looks decently safe, though you have some low AFR cells in the middle of a high AFR area that doesn't make sense. The fuel table will change depending on how the car runs, I wouldn't know what to tell you unless I see a datalog. The Ignition table looks pretty safe. I'd pull 2° from the 175kpa row but the rest is okay until it gets on a dyno.

 

Adam, look at my post here, your setup is similar to mine and you can reference the DL I mentioned for further comparison.
https://www.theturboforums.com/thre...-share-ford-302-turbo-a-f-timing-maps.384238/