What injectors are you running? Looks like a cheap Chinese flow machine? I have one also.

If your trying to flow large injectors 4 at a time on one of the cheap flow machines, you get bad results. Try flowing one injector at a time. The pump isn't big enough. Over this winter I'm going to add a Bosch 044 pump and larger lines and rail to my setup.

 

Just did this, but found something a little better but I think I'm just buying a little better machine at some point. It used to work well but they don't tell you what to run in it, so I put a fuel injection cleaner in it and it ate up everything inside and outside too. What are you using for fluid in yours?

 

Fuel injector cleaner ng.

I run mineral spirits. That's one of the fluids that is recommended. No issues "yet". When I'm done I blow out of injectors and run light weight oil thru them.

 

the injectors are tested 1 at a time for a set amount of time each. juat showed the before and after results is all.

 

little last tnt day of the year. last day my new water pump would work. last day my fuel line would hold seal, but its ready to go stupid fast once cranking the boost up. not bad running a 9.21 lifting at 1000ft. just trying to see if the converter would start to losen up...and it did by about 250rpms. on the right path at least. just need these expensive ass new parts to stop failing like they are disposable pieces.

 

from same day. only solid pic anybodys ever taken of it. so had to buy it, cuz wheelie.lol went [email protected]

#ad

 

Dang, thats a cool pic. And an awesome launch, and a solid time too! Just need to stop breaking it so you can do it more often Not that I'm one to talk!