1. The Turbo Forums - The discussion board for both hard core and beginner turbocharged vehicle enthusiasts. Covering everything from stock turbocharger cars, seriously fast drag racers, boats, motorcycles, and daily driver modified turbo cars and trucks.
    To start posting in our forums, and comment on articles and blogs please

    IF YOU ARE AN EXISTING MEMBER: You can retrieve your a password for your account here: click here.

my turbo project

Discussion in 'Ford Modular Forum' started by GoldenHP, Apr 3, 2017.

  1. GoldenHP

    Joined:
    Mar 15, 2009
    Well ive been working on this project since christmas and this is where im at now.
    2000 bmw 323 e46 2dr
    5.4/l 32v dohc motor
    3650 trans
    single 76mm on3 turbo
    I need to get wider tires and a m3 posi unit installed

    IMG_20170314_201615.jpg #ad


    IMG_20170202_142952.jpg #ad


    IMG_20170202_142948.jpg #ad


    IMG_20170119_175023.jpg #ad


    IMG_20170119_012537.jpg #ad


    IMG_20170115_194933.jpg #ad


    IMG_20170115_194913.jpg #ad


    IMG_20170109_020132.jpg #ad


    IMG_20170105_190200.jpg #ad


    IMG_20170101_175409.jpg #ad
     
    m j and MCA like this.
  2. 99TTGT

    Joined:
    Dec 15, 2007
    Long time coming
     
  3. GoldenHP

    Joined:
    Mar 15, 2009
    What do you mean?
     
  4. phillyc

    Joined:
    Dec 15, 2016
    Nice intake. Good luck with the swap. What are you hoping to run make?
     
  5. GoldenHP

    Joined:
    Mar 15, 2009
    right now its on stock heads and bottom end and i run about 7 to 10 psi. i'm not sure on power just yet and i'm still playing with tuning on e85. I run 50 lb. injectors and i'm maxing dutie cycle out but it also is still pulling fuel when its max only bout 7%. I did take it to the track and i think it did good. pretty consistent on the 3 runs i made. Running 245 40 19 run flats with a 3.07 final drive and no posi. it ran... 60ft 2.14-2.51, 1/4 mile et. 12.50-12.51, trap mph 118-118.9.
     
  6. GoldenHP

    Joined:
    Mar 15, 2009
    oh since the last time i posted awhile back i blew up the 3650 tran in third gear. wasnt a power shift it jus blew up under power, i think it was the weight of car and gearing
     
  7. Jeremy

    Joined:
    Jun 6, 2005
    I would get larger injectors for sure. At least 60's for that setup and e85. Not sure on the weight of the car but based on the numbers sounds like your around 450-500rwhp. 3650 is rated to 400tq iirc. Final gearings is a tad low. If the car is 3500-4000 lbs may want to shoot for 3.31-3.55 range.
     
  8. GoldenHP

    Joined:
    Mar 15, 2009
    I found a m3 rear and it has 3.66 final gear but i also run a t56 trans now. I m thinking of going to a 4.6 al built motor over the winter to bring the weight down. initially the car weighs the same as a new edge mustang
     
  9. 99TTGT

    Joined:
    Dec 15, 2007
    You need to built the bottom end
    With e85 you gonna have to drop a penny and go big 80lbs is a good starting point
    700-750rwhp easy
     
  10. GoldenHP

    Joined:
    Mar 15, 2009
    Car 3777 with me i. It
     
  11. GoldenHP

    Joined:
    Mar 15, 2009
    Update
    Apparently iys hard to find a teskids now. But i got a 03 aviator mptor completly stock with cobra intake and now im running twin gt35 turbos with stainless vband housing.
    I did got to battle creek speedfast to do 1/2 mile racing to top 151 in halfmile soft launch 2nd pass turbo suck in the filter limped ot home but here is new build
     
  12. GoldenHP

    Joined:
    Mar 15, 2009
  13. GoldenHP

    Joined:
    Mar 15, 2009
  14. GoldenHP

    Joined:
    Mar 15, 2009
Loading...
Similar Topics - turbo project Forum Date
2014 F150 Single turbo Project. Ford Modular Forum Jan 15, 2015
Please help me identify this turbo and if it'll work for my project...... Ford Modular Forum Jan 23, 2014
My 2V 80mm S400 turbo project-update Ford Modular Forum Dec 6, 2008
Loading...