I am wanting to upgrade my turbo to a pte 7576. My problem is my master power t76 p trim compressor housing is already maxed out on size between my radiator and belt tensioner. Can anyone tell me if the pte 76 is bigger, the same, or smaller in dimensions on the compressor housing?

 

Depends on the compressor cover size you go with. What do you have now?

 

I don't currently have a pte turbo. My current turbo is a masterpower mpt76 p-trim.

 

The PTE is bigger. I think the MP's are simular in size to the On3's, and I know the PTE is bigger than one of those. I wanted a PTE, but didnt have room. There is a picture here somewhere of a comparision between a On3 and 7675.

 

precision 7675CEA .96 AR vs MP70 .68 AR

#ad

#ad

 

are you sure the mp is a t76/76mm?? i have a t76mp here and see diff numbers cast into the compressor housing and the wheels look different

 

Please Re-read my post, I said that's a Master Power 70mm.

 

my apologies, i had thought the O.P. had posted the pics

 

No problem! With that said, the mp70 and mp76 both have the same size (S) covers, correct?

 

when i get home ill post pics with some measurements if the O.P. doesn't mind

 

Please do I don't think the mp70 and mp76 have the same size cover.

 

Youc can put a different compressover cover on the turbo to match what you currently have. The pte s cover is 4"/2.5" out if you can get the 7675 with a s cover vice that h cover (4"/3") in the pic you will have a very similiar compressor cover size. I have direct swapped precision and comp turbos into kits on3 and mp no issues.

 

The MP70 (not sure about 76) has a S-cover. The 7675 only comes with the H-cover (ported or unported) or GT42 cover. You would have to call precision to ask if they could put a S-cover on the 7675.

 

I know comp will custom build what ever size you want as long as it fits the frame. They made a 84mm in the s cover. Try calling precision.