I have an hx40 on my build, and it has some form of vband on the discharge of the compressor, i know a lot of guys just run a silicone coupler or grind it down and do the same thing, but is there any readily available v-band to regular piping available? Mine points straight down, i was just wondering if there was a straight section available. I've read about 90 and 45 elbows. The coupler blew off mine at like 6 psi, so im worried it will do it for sure i i step up the boost

 

Its a special vband. it measures 4" od, if you buy a 4" vband it will be way too big.

So buy this one.

http://store.airflo.com/vclfor3ex.html

if you need the flanges for it...

http://store.airflo.com/ad411.html

 

Um, please read the post carefully. I have a running turbo setup, I already have the exhaust flanges. I'm looking to redo the intake side where it comes out of the turbo. Its just under 3inch o.d.

 

He was looking for the compressor outlet V band but thanks for the link, I FINALLY found the right V band for my Holset turbo!

 

I got my turbine vband and exhaust flange from diesel auto power.

 

i ran 80psi using a silicone over vband poped off once, all it needed was a little hairspray.

 

What size was the silicone? Im using a 3 inch coupler on the comp vband and its pretty loose. It compresses the tbolt most of the way

 

the band bead is same od as my tube, i really had to crank down on the other side of the vband and was very skeptical it would work. slipped once around 30psi hairspray held it to 80. you can see the difference on how far its cranked down on the vband bead.

#ad

 

Lucky for you! They are readily available, with clamps and gaskets too! This is a good company for some hard to get Holset parts. I got my marmon flange for me H2E downpipe from them. Good quality and good service.

http://www.columbusdieselsupply.com/tp9.php

 

That's awesome. Exactly the kind of thing I was looking for. Thanks man!!

 

Just to update, I went to look at the website again and it moved. The part can be found here, I don't know any other company that has this part
http://www.columbusdieselsupply.com/images/turboAccessories.pdf