1. The Turbo Forums - The discussion board for both hard core and beginner turbocharged vehicle enthusiasts. Covering everything from stock turbocharger cars, seriously fast drag racers, boats, motorcycles, and daily driver modified turbo cars and trucks.
    To start posting in our forums, and comment on articles and blogs please

    IF YOU ARE AN EXISTING MEMBER: You can retrieve your a password for your account here: click here.

FAST system advice for Turbo 5.0

Discussion in 'EFI Tuning Questions and Engine Management' started by got9lbs, Feb 10, 2009.

  1. got9lbs

    Joined:
    Jun 17, 2006
    I have a classic fast system Im going to install on my 5.0 mustang with a single 70mm turbo. I daily drive the car all summer and was wondering if and what ignition upgrades im going to need. Currently the car will be stock block and 9-10lbs, I might add a cam and heads with an intake before I rebuid it. When I rebuild the motor its going to be a 331 with a boss or dart block. Do I need/can I install an MSD Digital 6 with correct coil? I ask these questions since this is my first car with a distributor. Will this box work and is it a good choice for a street car with a 5 speed? Any advice/ suggestions are great and I thank you in advance.
     
    got9lbs, Feb 10, 2009
    #1

  2. my8950

    Joined:
    Jan 30, 2003
    You can use just the ECU, it will run your stock ignition with a TFI. However, it may not be a bad idea to go with a little spark amplifier like a 6AL or something comparable.
    I drove my car, XR4ti with the Gen 7 on it daily for 4 yrs, no problems, other then the car falling apart
     
    my8950, Feb 13, 2009
    #2
Loading...
Similar Topics - FAST system advice Forum Date
FAST/SpeedPro Bank-to-bank system EFI Tuning Questions and Engine Management Jun 4, 2014
Which system would work better for 150's? HP EFI or FAST XFI? EFI Tuning Questions and Engine Management May 9, 2012
need help old fast system EFI Tuning Questions and Engine Management May 26, 2010
Loading...
bridal-shoal