Would like to get specs on this cam, but the cam card was lost,called anderson but they will not give any info without a reciept !

 

Int. Lift 0.544
Exh. Lift 0.568

Int. C/L 108
Exh. C/L 116

Int. @.050 228
[email protected] 236

Lift numbers a with 1.6 ratio rockers
Max RPM is 6600

Hope this helps...

 

YES ! it does help, thank you very much but one more question, Where do they want the cam in at ??

 

Straight up I believe. Surely Anderson will tell you that.

 

probably not. they dont do anything for free

 

No, anderson will not provide any info unless you have proof of purchase,even if you had bought it three years ago ! Thanks for your help, its alot more than I got Anderson.

 

fuk anderson I had the same trouble told the to stick it in his ass!

 

+1, and further I'm gathering a database of anderson cams just because he is what he is. I have most of them, so if anybody wants, just holler.

 

Holler,Holler, Would you maybe have a cam card for the B41 ?

 

Not much on the b41, all I have is this...
AFM B-41 228/236 .544/.544 w/1.6 rocker

I would like to encourage all to send me(GOOD) pics of any afm cam cards.

 

Here is the mother load of Anderson Cam Specs and various cam card pics.

http://www.corral.net/forums/showthread.php?t=614540&highlight=anderson specs

 

Thanks to all for the info,Your help is much appreciated ! I bet Anderson would up his sales alot if he was more informative on his products

 

he'd damn sure up the resale value.

 

Here ya go. You'll notice one card shows an I/CL @ 108 and the other I/CL @ 112. :noidea:

#ad


#ad

 

your not looking for center line your looking for seperation
and its 112 from what i read

 

This was the question he was looking for an answer to. He is looking for an I/CL and not an LSA. AFM's own spec cards contradict one another. Yes, they both have 112LSA's but he may have a cam that is ground 4 degrees advanced. Degreeing it will be the only way to actually know for sure. Now he has something to go off of for a reference.

 

put it in strait up thats where most all cams want. its allready ground for where it should be

 

How do you know that? He could have a cam that was ground on a 112 I/CL or he could have a cam ground on a 108 I/CL.....he will never know for sure until he degrees it in. If he just throws that cam in there dot to dot without degreeing it he will never know exactly where it's set at. 4 degrees is a helluva lot of difference to not check. 4 degrees is enough to shift his powerband up or down also.

 

+1

 

you think anderson is bad buy one from bennett

i bought a pure street cam and they didnt give me any specs at all

so i called comp and said i lost the card it was a woman on the phone had to talk to her still to get them out of her


so i sold the dam thing and i will not buy another one from them if thats the way they treat a customer

i wasnt someone that just called up i ordered the cam i should of gotten a card